Storage Power Systems LiFePO4 48V 200Ah Battery
| Lifepo4 48v 200ah battery model | BCT-SPS 10kWh |
| Storage capacity | 10240Wh |
| Standard capacity | 200Ah/51.2V |
| Standard charging voltage | 57.6V-60V |
| Continuously use input current | 100A |
| Continuously use output current | 100A |
| Maximum charging voltage | 100V |
| Cut-off | 2.5V single cell |
| Charging cut-off voltage | 3.65V±25mV single cell |
| Rshoot delay protection | 1000mS |
| Over-discharge delay protection | 1000mS |
| Short circuit protection recovery | Disconnect load |
| Short circuit protection delay | 330uS |
| Self-Discharge(25°) | <3%/month |
| Depth of discharge | >80% |
| Lifepo4 48v 200ah Battery Cycle life | >5000 times(<0.5C) |
| C-rate Discharge | <0.8C |
| Charge method(CC/CV) | Operation: -20℃-70℃; Recommendation: 10℃-45℃ |
| Lifepo4 48v 200ah battery warranty | 5 years |
| Product size | 781±2mm×566±2mm×406±2mm |
Introduction:
For no city power areas, the battery pack can be charged by solar panels and used for night lighting;
For the areas that city power is expensive, the battery pack can be charged during the electricity valley value perod, and used at the peak power period;
For the areas which power off from time to time, the battery pack can be used as UPS, to avoid information loss caused by sudden power outage.
The battery pack is applicable to commercial lighting, industrial lighting, home lighting, outdoor lighting, caping tourism, farming, planting, the night market stalls, etc.
Hot Tags: storage power systems lifepo4 48v 200ah battery, China storage power systems lifepo4 48v 200ah battery manufacturers, suppliers, factory
